Vastex – LITTLERED X3-D – LR-X3D-78 – Conveyor Dryer
$17,935.00
The all-new multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments… read more
Description
The all-new multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.
It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.
The 78 in. (198 cm) wide LittleRed X3-D-78 model accommodates up to three rows of garments, and cures a whopping 1080+ plastisol-printed garments/h, 555+ water-based or discharge-printed garments/h, and 155+ garments/h inkjet printed with digital white ink or pretreated for DTG printing at 3 minutes dwell time.
The X3-D-78 model has an overall length of 102 in. (260 cm). The heating chamber is 41 in. (104 cm) long and features a powerful, targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.
Capacity can be increased as needs grow by adding additional heating chambers, extending the belt length and increasing the infinitely-variable speed setting of the digital belt control.
FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time
POWERFUL
26,700W@240V total wattage
DEPENDABLE
Industry-leading 15-year heater warranty
EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
FAST
- 1080+ garments/hr for plastisol inks
- 555+ garments/hr for water-based or discharge inks
- 185+ garments/hr for DTG digital white ink @ 3 minutes
- 155+ garments/hr for DTG digital white ink @ 2.5 minutes
CONSISTENT
Low friction belt aligner and DC belt speed control with digital display
HEAVY DUTY
"X-Series" Conveyor Belt Tracking System with Teflon coated fiberglass belt
ACCURATE
Digital PID Temperature controller is accurate to +/-1°F
ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater
EXPANDABLE
Add 24 in. (61 cm) chambers and/or 18 in. (46 cm) belt extensions
OPTIONS
- Additional heating chambers and conveyor belt extensions
- Heavy duty belt motor (recommend for longer conveyor belts)
- Locking casters for mobility
SHIPPING
Additional shipping charges apply.
