Fluid Inks – High Density Additive
HIGH DENSITY ADDITIVE is a plastisol additive designed for raised texture effects. High Density Additive has excellent durability.
Mix 20% High Density Additive to any Fluid Inks Plastisol Ink.
Parameters vary between all flash units. Flash for 2-3 seconds so that the ink deposit reaches 150-250°F (65-121°C)
Cure at 325°F (162°C) over a 60-90 second period depending on oven type and thickness of ink deposit. A thicker deposit will take longer to cure as the heat must penetrate through the entire ink layer.